Crane and Rigging Safety

www.safetygoodwe.com
The Safety Print - Safety Shield 

Crane and Rigging Safety

1. Pre-Operation Inspection: Conducting thorough inspections of cranes and rigging equipment before each use to ensure proper functioning and safety.
2. Certified Operators: Ensuring crane operators are properly trained, certified, and competent to operate the specific type of crane being used.
3. Load Capacity Limits: Adhering to the manufacturer's load capacity limits and never exceeding the rated capacity of the crane or rigging equipment.
4. Load Weight Verification: Verifying the weight of loads before lifting and ensuring it is within the crane's capacity and the rigging equipment's safe working load.
5. Proper Rigging Selection: Selecting the appropriate rigging equipment, such as slings, shackles, and hooks, based on load characteristics and lifting requirements.
6. Securing Loads: Properly securing and attaching loads to the crane hook or rigging equipment using appropriate hitch types and techniques.
7. Clear Communication: Establishing clear communication protocols between crane operators, riggers, and signal persons to ensure safe and efficient operations.
8. Maintaining Safe Distances: Maintaining safe distances from power lines, structures, and other obstructions to prevent crane contact and electrocution hazards.
9. Stable Ground Conditions: Ensuring the crane is set up on stable ground and using outriggers or mats if necessary to prevent tipping or sinking.
10. Boom and Jib Positioning: Positioning the crane boom and jib properly to avoid collisions with obstacles and ensure safe lifting angles.
11. Avoiding Two-Blocking: Preventing the hook block from striking the boom tip by avoiding over hoisting and properly controlling load movement.
12. Lifting Near Personnel: Implementing exclusion zones and ensuring personnel stay clear of the crane's swing radius and the path of moving loads.
13. Hoisting and Lowering Procedures: Gradually lifting and lowering loads to prevent sudden movements and minimize swinging.
14. Emergency Procedures: Establishing emergency response procedures for situations such as equipment malfunction, load drops, or worker injuries.
15. Rigging Inspection: Regularly inspecting rigging equipment for wear, damage, and defects, and replacing any compromised components immediately.
16. Weather Monitoring: Monitoring weather conditions and suspending crane operations during high winds, lightning storms, or other adverse weather events.
17. Load Handling Practices: Avoiding sudden starts, stops, or changes in direction during load handling to maintain stability and prevent accidents.
18. Ground Personnel Safety: Providing training to ground personnel on safe practices for working around cranes and rigging operations.
19. Post-Operation Inspection: Conducting post-operation inspections of cranes and rigging equipment to identify any damage or maintenance needs.
20. Continuous Training and Improvement: Providing ongoing training and reinforcement of safe crane and rigging practices to ensure a culture of safety and compliance.